Step 6
Carefully install the red lens cover back into place. I found it easiest to place one tab in then work the other end into place. Be careful not to bend it too far! One last check
before reinstalling the plastic light cover - close the hatch and have someone hit the brake for you. If all looks good, snap the cover back into place.
Align all of the retaining clips into the slots. Start at
one end and work towards the other - push directly behind where the clips are located until they pop back into place
We don’t need any tape along the top of the lens as the black vinyl strip that is mounted on the cover will firmly hold it in place. Any tape would be seen sticking out under this cover and would look unsightly. (Trust me, I
didn’t get this all right on the first try)
This photo also has a good view of the metal retaining clips.